Special Equipment; Registration Plate; Technical Data (International System) - COMAC OPTIMA 85 Use And Maintenance Manual

Each design is created with the aim of giving the customer a new reason to choose Comac spa products, this type of scrubbing machines in particular can be equipped with the following devices:
• ECO-MODE: a device that decreases the noise level and lowers energy consumption.
The paragraphs in the document that talk about the following equipment will have the wording "ECO-MODE".
• COMAC DOSING SYSTEM: this is the dosing system for the separate management of water and detergent, and allows you to increase or reduce the delivery depending on the dirt to be treated.
The paragraphs in the document that talk about the following equipment will have the wording "CDS".
• PRESSURE MONITORING: a system that monitors the power dispensed by the brush motors in order to guarantee maximum effectiveness on any type of floor.
The paragraphs in the document that talk about the following equipment will have the wording "PM".
• COMAC FLEET CARE: system that allows the remote control of machines status: if, when and where each machine is operating or if maintenance is needed, to let you promptly intervene avoiding machine
downtimes and unexpected costs for extraordinary maintenance.
The serial number plate is located at the rear of the steering column, and indicates the machine's general characteristics, including its serial number. The serial number is a very important piece of information and
should always be provided together with any request for assistance or when purchasing spare parts. The serial number plate contains the following:
11
10
9
8
7
6

TECHNICAL DATA (INTERNATIONAL SYSTEM)

Rated power
Working width
Squeegee width
Work capacity, up to
Number and diameter of the brushes
Brushes rpm
Electrical characteristics of the brush motor
Maximum weight of the brushes
Electrical characteristics of the traction motor
Maximum forward speed
Maximum gradient with full load
Electrical characteristics of the vacuum motor
Suction vacuum (hole Ø0)
Solution tank volume
Recovery tank volume
Detergent tank volume (version with dosing system only)
Turning circle
Maximum machine length (without bumper kit)
Maximum machine height (without roof)
Maximum machine width (without squeegee)
Battery Compartment Dimensions (Length x Width x Height)
Rated battery voltage
Battery hopper weight
Machine weight
Transported machine weight
Machine weight in running order
Sound pressure level (ISO 11201)
Uncertainty Kp
A
Body vibration level

SPECIAL EQUIPMENT

REGISTRATION PLATE

1. The weight of the batteries used to power the appliance (expressed in Kg).
2. The IP protection rating of the appliance.
3. The gross weight of the appliance (expressed in Kg).
1
4. The identification code of the appliance.
5. The serial number of the appliance.
6. The name of the appliance.
2
7. The nominal power consumed by the appliance (expressed in W).
8. The maximum grade that the appliance can handle during work activities (expressed in %).
9. The year in which the appliance was manufactured.
3
10. The nominal voltage of the appliance (expressed in V).
11. The commercial name of the appliance and the manufacturer's address.
4
5
U/M
W
mm
mm
m /h
2
No. / Ø mm
rpm
V/W
kg
V/W
Km/h
%
V/W
mbar
l
l
l
mm
mm
mm
mm
mm
V
kg
kg
kg
kg
dB (A)
dB (A)
m/s
2
13
OPTIMA OPTIMA
85B 100B
2840 2840
850 1010
1120 1120
6800 8080
2 / 430 2 / 520
160 160
24 / 500 24 / 500
63 63
24 / 1000 24 / 1000
8 8
10 10
24 / 420 24 / 420
85 85
156 156
138 138
5 5
1010 1010
1796 1796
1245 1245
900 1055
430x630x470 430x630x470
24 24
238 238
340 340
578 578
815 815
65.4 65.4
1.5 1.5
< 0.5 < 0.5