Table of Contents
Advertisement
The descriptions contained in this document are not binding. The company therefore reserves the right to
make any modifications at any time to elements, details, or accessory supply, as considered necessary
for reasons of improvement or manufacturing/commercial requirements. The reproduction, even partial,
of the text and drawings contained in this document is prohibited by law.
The company reserves the right to make any technical and/or supply modifications. The images
are shown as reference only and are not binding as to the actual design and/or equipment.
SYMBOLS USED IN THE MANUAL
Open book symbol with an "i":
Indicates the need to consult the instruction manual.
Open book symbol:
Tells the operator to read the user manual before using the device.
Covered place symbol:
The operations preceded by this symbol must always be carried out in a dry, covered area.
Information symbol:
Indicates additional information for the operator, to improve the use of the device.
Warning symbol:
Carefully read the sections preceded by this symbol meticulously following the instructions
indicated for the safety of the operator and the device.
Danger symbol (corrosive substances):
The operator should always wear protective gloves to avoid the risk of serious injury to the
hands caused by corrosive substances.
Danger symbol (battery acid leakage):
Indicates the danger of leaking acid or acid fumes from the batteries while they are being
recharged.
Danger symbol (moving carriages):
Indicates that the packed product should be handled with suitable carriages that conform
to legal requirements.
Mandatory room ventilation symbol:
Informs the operator that the room must be ventilated while the batteries are being
recharged.
Symbol indicating the compulsory use of protective gloves:
Indicates that the operator should always wear protective gloves, to avoid the risk of
serious injury to his hands from sharp objects.
Symbol indicating a treading ban:
Informs the operator that it is forbidden to tread on machine components, as this could
lead to serious injury.
Recycling symbol:
Tells the operator to carry out the operations in compliance with environmental regulations
in force in the place where the appliance is being used.
Disposal symbol:
Carefully read the sections marked with this symbol for disposing of the appliance.
PURPOSE AND CONTENT OF THE MANUAL
The aim of this manual is to provide customers with all the information needed to use the appliance in
the safest, most appropriate and most autonomous way. It includes information concerning technical
aspects, safety, operation, appliance downtime, maintenance, spare parts and scrapping. Operators
and qualified technicians must read the instructions in this manual carefully before carrying out any
operation on the appliance. If in doubt about the correct interpretation of instructions, contact your
nearest Customer Service Centre to obtain the necessary clarifications.
TARGET GROUP
This manual is aimed at operators and qualified technicians responsible for appliance maintenance.
Operators must not perform operations that should be carried out by qualified technicians. The
manufacturer is not liable for damages resulting from failure to comply with this veto.
STORING THE USE AND MAINTENANCE MANUAL
The Use and Maintenance Manual must be stored in its special pouch close to the appliance, protected
from liquids and anything else that could compromise its legibility.
ON DELIVERY OF THE APPLIANCE
When the machine is delivered to the customer, an immediate check must be performed to ensure all
the material mentioned in the shipping documents has been received, in addition to verifying that the
equipment has not been damaged during transportation. If this is the case, the carrier must ascertain
the extent of the damage at once, informing our customer service office. It is only by prompt action of
this type that the missing material can be obtained, and compensation for damage successfully claimed.
INTRODUCTORY COMMENT
Any type of equipment can only work properly and effectively if used correctly and kept in full working
order by performing the maintenance operations described in the attached documentation. You should
therefore read this instruction manual carefully, consulting it again if issues arise while using the machine.
If necessary, remember that our assistance service (organised in collaboration with our dealers) is
always available for advice or direct intervention.
IDENTIFICATION DATA
For technical assistance or to request replacement parts, always give the model, the version and the
serial number (written on the relevant plate).
TECHNICAL DESCRIPTION
The ANTEA and the VERSA are scrubbing machines that, using the mechanical action of one or more
brushes and the chemical action of a water-detergent solution, can clean a wide range of floors and types
of dirt, collecting, when it is moving forward, the dirt removed and the detergent solution not absorbed
by the floor.
The appliance must only be used for this purpose.
INTENDED USE
These scrubbing machines were designed and built for cleaning (scrubbing and drying) smooth, compact
flooring in the commercial, residential and industrial sectors by a qualified operator in proven safety
conditions.
The scrubbing machine is not suitable for cleaning rugs or carpet floors.
The appliance is only suitable for use in indoor - or at least covered - areas.
N.B.: the appliance is not suitable for use in the rain, or under jets of water.
IT IS FORBIDDEN to use the appliance for picking up dangerous dusts or inflammable liquids in
places with an explosive atmosphere. In addition, it is not suitable as a means of transport for
people or objects.
Operator cooperation is paramount for accident prevention. No accident prevention programme can be
effective without the full co-operation of the operator who is directly responsible for machine operation.
The majority of occupational accidents that happen both in the workplace or whilst moving are caused by
failure to respect the most basic safety rules. An attentive, careful operator is most effective guarantee
against accidents and is fundamental in order to implement any prevention programme.
REGISTRATION PLATE
The registration plate is located on the lower portion of the recovery tank, inside the appliance, and
contains the following information:
1. The weight of the batteries used to power the appliance (expressed in Kg).
2. The gross weight of the appliance (expressed in Kg).
3. The IP protection rating of the appliance.
4. The identification code of the appliance.
5. The serial number of the appliance.
6. The name of the appliance.
7. The nominal power consumed by the appliance (expressed in W).
8. The maximum grade that the appliance can handle during work activities (expressed in %).
9. The year in which the appliance was manufactured.
10. The nominal voltage of the appliance (expressed in V).
11. The commercial name of the appliance and the manufacturer's address.
11
10
9
8
7
6
SPECIAL EQUIPMENT
Each design is based on the objective or giving the client a new reason for choosing Comac spa
products, the Antea and Versa can be fitted with the following devices:
•
ECO-MODE: a device that decreases the noise level and lowers energy consumption.
The paragraphs in the document that talk about the following equipment will have the wording
"ECO-MODE".
•
COMAC DOSING SYSTEM: this is the dosing system for the separate management of water and
detergent, and allows you to increase or reduce the delivery depending on the dirt to be treated.
The paragraphs in the document that talk about the following equipment will have the wording
"CDS".
•
PRESSURE MONITORING: a system that monitors the power dispensed by the brush motors in
order to guarantee maximum effectiveness on any type of floor.
The paragraphs in the document that talk about the following equipment will have the wording "PM".
•
ON-BOARD BATTERY CHARGER: a system that makes it much easier to charge the batteries,
because the charging device is already present in the appliance itself.
The paragraphs in the document that talk about the following equipment will have the wording "CB".
•
SPRAY AND SUCTION TOOLS: a system that allows you to spray detergent solution where
the appliance cannot reach, moreover, thanks to the vacuum accessory it is possible to collect
everything leaving the floor dry.
The paragraphs in the document that talk about the following equipment will have the wording
"SST".
4
SAFETY
1
2
3
4
5
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
