First Installation; Manual Rinse Cycle - Gaggia Milano MAGENTA MILK Operating Instructions Manual

English
8
15 cm
15 cm
15 cm
15 cm
15 cm
LUNGO
LUNGO
4219-465-02541 MAN. GAG. MAGENTA Milk EN-NL-PL Rev 02.indd 8

First installation

Before using the machine, it is essential to follow a few simple steps, clearly
described in the explanatory drawings you found in the quick guide at the
beginning of this instruction manual.
Note: for even tastier coffee, we recommend that you initially prepare 5 cups of
coffee to allow the machine to self-adjust.

Manual rinse cycle

During the first installation or after a long period of machine inactivity, a manual
rinse cycle must be carried out.
1 Place a container under the coffee dispensing spout, scroll through the
different pages and select a "ESPRESSO LUNGO".
2 Press the " " button until "
coffee.
3 Press the START/STOP
dispense hot water.
4 Empty the container and remove the Capp in Cup system from the steam tube.
5 Place the container under the steam tube and select " HOT WATER ".
6 Press the START/STOP
7 Empty the container and repeat steps 5 to 7 until the water tank is empty.
8 When finished, refill the water tank to the MAX level. The machine is now ready
for use.
" is selected, without adding pre-ground
button to start dispensing. The machine will
START/STOP
button to start dispensing .
START/STOP
09/09/2020 16:47:45