First Installation; Manual Rinse Cycle - Gaggia Milano CADORNA MILK RI9603 Operating Instructions Manual

English
14
ESPRESSO COFFEE
CAPPUCCINO LATTE MACCHIATO
COFFEE
30 ml
ON/OFF my favourites HOME clean/setting
TEMP
medium
ESPRESSO
COFFEE
30 ml
TEMP
medium
ESPRESSO
clean/setting
ON/OFF my favourites HOME
ON/OFF my favourites HOME clean/setting
4219-450-08051 MANUAL GAG. CAD. MILK EN-FR 120US.indd 14

First Installation

Before using the machine, it is essential to follow a few simple steps, clearly
described in the explanatory drawings found in the quick guide at the beginning of
this instruction manual.
Note: To make the best-tasting coffee, you should brew 5 coffees initially to allow
the machine to complete its self-adjustment.
Warning: Do not use the steam wand protection as a handle, use the appropriate
classic pannarello handle.

Manual rinse cycle

When first installing the machine or after a long period of its inactivity, it is
necessary to prime the water circuit through the manual rinse cycle.
1 Place a container under the coffee dispensing spout, browse through the
pages and select "ESPRESSO LUNGO".
2 Press the "
START/STOP
3 Press the START/STOP
dispense hot water.
START/STOP
START/STOP
4 Empty the container and remove the Capp in Cup system from the steam
wand.
5 Place the container under the steam wand and select the " HOT WATER "
beverage.
6 Press the START/STOP
7 Empty the container and repeat steps 6 to 7, until the water tank is empty.
8 At the end of this operation, fill the water tank again up to the MAX level. The
machine is now ready for use.
"button without adding pre-ground coffee.
button to start dispensing, the machine will
START/STOP
button to commence dispensing.
START/STOP
23/04/2020 09:57:32