Parkside PLVA 40-Li A1 Translation Of The Original Instructions page 29

Take care of your implement:
• Switch off the power when
the implement is to be carried
across steps.
• Before switching on the ma-
chine, always check whether
all screws, nuts, bolts and other
fasteners are tightly secured and
that the protection devices and
protective gratings are in place.
Worn or damaged labels must
be replaced. Never operate
the implement if safety devices
(e.g. impact protector, parts of
the cutting facility or bolts are
missing, worn out or damaged.
Check especially the starting le-
ver for damage. To avoid imbal-
ance, all tools and bolts must be
exchanged as complete sets.
• Only use spare parts and acces-
sories that have been supplied
or recommended by the manu-
facturer. The use of alien parts
results in the immediate loss of
all guarantee claims.
• Ensure that all nuts, bolts and
screws are firmly tightened and
that the implement is in a safe
working state.
• Never try to repair the imple-
ment yourself, other than you
have been trained accordingly.
All work that has not been listed
in these Instructions must only be
carried out by authorised servic-
ing agencies.
• Treat the implement with the
greatest care. Always keep the
tool clean for better and safer
work. Follow the maintenance
instructions.
• Never overload the implement.
Always work within the speci-
fied capacity range. Do not use
low-power machines for heavy-
duty work. Do not operate the
implement for purposes for
which it is not intended.
• Check the collection unit regu-
larly for wear or loss of function.
• Replace worn or damaged parts
for safety reasons.
• When using the machine with
several prong attachments,
beware that moving one prong
attachment can lead to the other
prong attachments rotating.
• When setting the machine,
make sure your fingers do not
become caught between the
moving prong attachments and
stationary parts of the machine.
• Allow the motor to cool down
before parking the machine for
a longer period.
• When servicing the prong attach-
ments, beware that the prong
attachments can be moved even
when the drive is switched off.
• Replace worn or damaged parts
for safety reasons. Use only origi-
nal spare parts and accessories.
• If the machine is stopped to
service, inspect, store or replace
an accessory part, switch off
the drive, pull the ignition key,
remove the battery from the de-
vice and make sure that all mov-
ing parts have come to a com-
plete stop. Allow the machine to
cool down before carrying out
inspections, settings etc. Treat
the machine with care and keep
it clean.
GB IE
29