Transport; Cleaning/Maintenance; General Cleaning And Maintenance Work - Parkside PLVA 40-Li A1 Translation Of The Original Instructions

• The implement can be operated with
or without the collection bag.
We recommend working with the col-
lection bag for aeration. We recom-
mend working without the collection
bag for scarifying.
• Mow the lawn to the required grass
height.
• Do not use the scarifier in long grass. It
may otherwise wind around the scari-
fier blade and result in damage to the
equipment.
• Select the appropriate working or
readjustment position (in the event of
cylinder wear) so that the implement is
not overloaded.
• Guide the implement at a walking
pace down lanes that are as straight
as possible. To ensure uninterrupted
aerating or verticuting the individual
lanes should always overlap by a few
centimetres. Dwelling too long at the
same place while the implement is run-
ning can damage the grass sward.
• Always clean the implement after each
use (see "Cleaning/Maintenance").
• After having treated lawns with dense
moss growth, it is advisable to reseed
the lawn so that it can regenerate itself
quicker.

Transport

• Adjust the transport position (+10
mm) setting (see "Setting the Working
Position") when transporting the imple-
ment.
• Lift the implement to transport it over
steps and sensitive surfaces (e.g. tiles).
Use the handle ( 9).
A

Cleaning/maintenance

Work that has not been de-
scribed in these Instructions
must be carried out by a ser-
vicing agency authorised by
us. Only use original parts.
Wear gloves when handling the
cylinder.
Switch off the device before any
maintenance or cleaning work, pull
the ignition key (
batteries (
and wait for the drum (
to come to a stop. Warning! Risk of
injury by dangerous moving parts!
General cleaning and
maintenance work
Do not jet water onto the
implement and do not clean
it under flowing water. This
would result in the danger of
an electric shock and the im-
plement could be damaged.
• When work has finished remove plant
residues adhering to the wheels, inside
the ventilation opening, the grass ejector
opening and the cylinder. Do not use
hard or pointed objects for this purpose
as they could damage the implement.
• Completely empty the collection bag.
• Always keep the implement clean. Do
not use cleaning agents or solvents.
We cannot be held liable for damage
caused by our implements if they were
improperly repaired, if non-original parts
have been used or if they were used not in
keeping with their intended purpose.
GB IE
21), remove the
19) from the device
16/17)
33