Inserting/Removing The Rechargeable Battery; Switching On And Off; Working With The Implement - Parkside PLVA 40-Li A1 Translation Of The Original Instructions

GB IE
Inserting/removing the
rechargeable battery
Switch off the device, pull the igni-
tion key (
drum to come to a stop.
1. To remove the battery (19) from the de-
vice, press the release button (20) on
the battery and pull the battery out.
2. To insert the battery (19), push the bat-
tery along the guide rail into the de-
vice. You will hear it click into place.

Switching on and off

Two batteries are required to
operate this product.
Before switching on the im-
plement ensure that it is not
in contact with any objects.
Keep your feet and hands
well away from the cylinder
and the ejector opening.
Danger of injury!
1. Place the device on a level piece of
lawn.
2. Open the cover (
3. Insert the rechargeable batteries (
(see "Inserting/removing the recharge-
able battery").
4. Insert the ignition key (
corresponding opening next to the re-
chargeable batteries (19) (see Fig.
5. To switch on, press the electronic
switch lock (1) on the handlebar and
then pull the start handle (2) towards
the handlebar. Release the electronic
switch lock (1).
6. To switch off release the starting lever
(2).
32
21) and wait for the
10).
21) in the
Overload protection: The mo-
tor is automatically switched off
when the implement is overloaded.
Release the starting lever and reset
the implement after a cooling down
period of approx. 1 minute.
WARNING! The cylinder con-
tinues to run for a brief pe-
riod after the implement has
been switched off. Do not tilt
or carry the implement while
the motor is still running and
do not touch the cylinder
while it is still rotating.
Danger of injury!

Working with the implement

To maintain a well cared-for lawn it should
be aerated every 4 to 6 weeks.
Verticuting is a more intensive intervention
than aerating and should only be carried out
once a year, the best time being in spring af-
ter the lawn has been mown for the first time.
When working on slopes
always proceed across the
slope. Be particularly careful
when walking backwards
19) and pulling the implement.
Danger of stumbling!
Switch off the device after doing
any work and when transporting
). the device, remove the batteries
from the device and wait for the
drum to come to a stop.
The shorter the grass, the better the
lawn can be treated. Furthermore,
the implement is less stressed and
the service life of the cylinder is
prolonged.