Front Output Shaft Zuidberg; Engagement Of The Front Output Shaft Zuidberg; Maximum Transferred Power - Zetor Proxima 70 2012 Operator's Manual

FRONT OUTPUT SHAFT ZUIDBERG

The front output shaft is equipped with a
fixed 6- or 21-spline terminal and its
speed is 1,000 rpm only.
The tractor may be equipped with an
optional front output shaft with both
directions of rotation:
a -
in direction of rotation of the
engine (standard)
b - against direction of rotation of the
engine (∗optional)
PTO DRIVE OF AGRICULTURAL MACHINES
E356
ENGAGEMENT OF THE FRONT
OUTPUT SHAFT ZUIDBERG
The front output shaft Zuidberg can be
engaged and disengaged using a switch
on the dashboard. Activation of the
switch is indicated by the illuminated
symbol on the switch.
The switch is fitted with a mechanical
lock (1) against unintentional switching
on. When activating the switch, depress
also the lock (1) in direction of the arrow.
The switch shall be off when
starting the engine.
H355

MAXIMUM TRANSFERRED POWER

front (Zuidberg)
1,000 rpm
rear
1,000 rpm
540 rpm
540E rpm
*In case of a transfer of power without
shocks, the value of the transferred
power may be increased to 50kW.
79
Output shaft Transferred
power
45kW*
full engine power
full engine power
full engine power
E358