Table of Contents
Advertisement
CALIBRATION OF TRAVEL SPEED OF
DIGITAL DASHBOARD
Dashboard
is
calibrated
assembly in production plant.
Do the repeated calibration:
− After significant wear of tyres
− When assembling new tyres
− When replacing the dashboard
CALIBRATION PROCEDURE
− On an appropriate area, mark a track
of 100 m length
− Inflate the tyres of the tractor to the
prescribed pressure, see tables of this
Operator´s Manual
− Start the engine
ADJUSTMENTS
E769
− Locate the tractor at the beginning of
after
the
the hundred-metre track
− Press
the
simultaneously.
pressed for 7 sec. There will be an
acoustic
inscription
display.
− Release both buttons (A) and (B), "c-
n-t" inscription stops flashing
− Start the tractor in a balanced speed of
-1
10 km.h
− After travelling the whole distance of
100 m, stop the tractor on a marked
end of the track (see fig. E769)
E770
(A)
and
(B)
buttons
Keep
the
buttons
signal
and
in
"c-n-t"
starts
flashing
on
the
181
− Press (B) button.
− If calibration has been completed
without errors, there will be acoustic
signal and "Pulse" inscription will
appear on the display
− After
2 sec,
calibration
appear on the display.
− After another 2 sec, the calibration is
automatically completed, dashboard is
calibrated and ready for operation.
E771
value
will
Advertisement
Table of Contents
