Setting/Check Modes - Epson tm-m30 Technical Reference Manual

Setting/Check Modes

As well as print mode, the following modes are also provided for making various printer settings and checking
items.
 Self-test mode
 NV graphics information print mode
 Receipt Enhancement information print mode
 Software settings mode
 Restore default values mode
 Interface setup mode
 Hexadecimal dumping mode
The self-test mode or hexadecimal dumping mode is selected depending on the operation performed when the
power is turned on.
NV graphic information print mode, Receipt Enhancement information print mode, Software settings mode,
and Restore default settings mode are selected depending on the Feed button operation performed during a
self-test.
Close the roll paper cover, and turn on the printer while pressing the Feed button.
Briefly press the Feed button.
Continuing the self-test
Press the Feed button
once briefly and then
hold it down.
NV Graphics
Information
Open the roll paper cover, and turn on the printer while pressing the Feed
button, and then close the roll paper cover.
54
Self-test
Hold down the Feed button.
Mode selection guidance
Press the Feed button Press the Feed button
twice briefly and then three times briefly and
hold it down. then hold it down.
Receipt Enhancement
Software Settings
Information
Hexadecimal dumping
Press the Feed button Press the Feed button
four times briefly and five times briefly and
then hold it down. then hold it down.
Restore Default
Interface Setup
Values