Product Checking And Accessories - Mitsubishi Electric 800 Series Instruction Manual

1.1

Product checking and accessories

Unpack the product and check the rating plate and the capacity plate of the inverter to ensure that the model agrees with the
order and the product is intact.
 Inverter model
A
Rating plate
Inverter model
Input rating
Output rating
SERIAL
Country of origin
• A: The voltage class is shown.
Symbol Voltage class
6 575 V class
• B: The inverter rated capacity or the inverter rated current is shown.
Symbol
0.75K to 7.5K Inverter ND rated capacity (kW)
0017 to 0120 Inverter ND rated current (A)
• C: The communication type and the functional safety specification are shown.
Symbol Communication / functional safety
None Standard model (RS-485 + SIL2/PLd)
E Ethernet model (Ethernet + SIL2/PLd)
Safety communication model (Ethernet +
SCE
SIL3/PLe functional safety)
• D: The output specification for monitoring and the rated frequency are shown for the standard model, and the
communication protocol group is shown for the Ethernet model and the safety communication model.
Symbol
-1 Pulse (terminal FM)
-4 Voltage (terminal AM)
-5 Voltage (terminal AM)
Protocol group A (CC-Link IE TSN, CC-Link IE Field Network Basic,
PA
MODBUS/TCP, EtherNet/IP, and BACnet/IP)
Protocol group B (CC-Link IE TSN, CC-Link IE Field Network Basic,
PB
MODBUS/TCP, PROFINET)
B C D E
MODEL :FR-E860-0017-1
INPUT :XXXXX
OUTPUT:XXXXX
SERIAL:XXXXXXXXXXX
MADE IN XXXXX
Description
Monitoring/protocol specifications
Rated
Control logic
frequency
60 Hz Sink logic
50 Hz Source logic
60 Hz Sink logic
60 Hz Sink logic
50 Hz Source logic
1. Introduction
1.1 Product checking and accessories
1
2
3
4
5
6
7
8
9
10
11