Chapter 1 Introduction - Mitsubishi Electric 800 Series Instruction Manual

1
Introduction
The contents described in this chapter must be read before using this product.
Always read the instructions before use.
 Abbreviations
Item
Parameter unit
Inverter
E800
E800-E
E800-SCE
FM type inverter
AM type inverter
Pr.
PU operation
External operation
Combined operation
 Trademarks
• Ethernet is a registered trademark of Fuji Xerox Corporation in Japan.
• MODBUS is a registered trademark of SCHNEIDER ELECTRIC USA, INC.
• BACnet is a registered trademark of the American Society of Heating, Refrigerating and Air-Conditioning Engineers
(ASHRAE).
• DeviceNet and EtherNet/IP are registered trademarks of ODVA (Open DeviceNet Vendor Association, INC).
• PROFIBUS and PROFINET are either trademarks or registered trademarks of PROFIBUS & PROFINET International.
• CC-Link IE TSN and CC-Link IE Field Network Basic are registered trademarks of CC-Link Partner Association.
• Other company and product names herein are the trademarks and registered trademarks of their respective owners.
 Notes on descriptions in this Instruction Manual
• Connection diagrams in this Instruction Manual appear with the control logic of the input terminals as sink logic, unless
otherwise specified. (For the control logic, refer to
10
1. Introduction
Description
LCD operation panel (FR-LU08) and enclosure surface operation panel (FR-PA07)
Mitsubishi Electric inverter FR-E800 series
Standard model (RS485 + SIL2/PLd functional safety)
Ethernet model (Ethernet + SIL2/PLd functional safety)
Safety communication model (Ethernet + SIL3/PLe functional safety)
Standard model with terminal FM (pulse output)
Standard model with terminal AM (voltage output)
Parameter number (Number assigned to function)
Operation using the PU (operation panel)
Operation using the control circuit signals
Combined operation using the PU (operation panel) and External operation
page 50.)