Customizing The Screen Saver File; Custom Screensaver Picture Limit; Screensaver Configuration - Yealink SIP-T2 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones

Customizing the Screen Saver File

1. Open the screen saver file.
2. Modify settings as you want.
3. Save this file and place it to the provisioning server.
4. Specify the access URL of the screen saver file in the configuration file.

Custom Screensaver Picture Limit

Either the smaller or the larger picture will be scaled proportionally to fit the screen. The screensaver picture format
must meet the following:
Phone Model
EXP50/EXP43
T57W/T54W/T48U/T48S/T48G
T46U/T46S/T46G/T33P/
T33G/T29G

Screensaver Configuration

The following table lists the parameters you can use to configure screensaver.
Parameter screensaver.wait_time
Description It configures the time (in seconds) to wait in the idle state before the screen saver starts.
15-15s
30-30s
60-1min
120-2min
300-5min
Permitted
600-10min
Values
1800-30min
3600-1h
7200-2h
10800-3h
21600-6h
205
Format
<=4.2 mega-
pixels
*.jpg/*.png/*.bmp/*.jpeg
<=2.0 mega-
pixels
<=1.8 mega-
pixels
Single File
Resolution
Size
<=5MB
2MB of space should be reserved
<=5MB
for the phone
<=5MB
<y0000000000xx>.cfg
Note