Shared Directory; Shared Directory Configuration - Yealink SIP-T2 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Parameter features.intercom.headset_prior.enable
It configures the channel mode when an incoming intercom call is automatically answered.
Note: It works only if "custom.handset.auto_intercom" is set to 1 or 2. For the phone, the headset
Description
mode should be activated for use; for the handset registered to the phone, the headset should be con-
nected in advance.
0-Speaker Mode
Permitted
Values
1-Headset Mode
Default 1

Shared Directory

Users can manage and call the contacts in the Shared Directory on the phone and all the registered handsets.
The shared directory can store up to 1000 contacts.
It is not applicable to DD phones.
Topics

Shared Directory Configuration

Shared Contact File Customization
Shared Directory Configuration
The following table lists the parameters you can use to configure the shared directory.
Parameter static.directory_setting.shared_contact.enable
Description It enables or disables the Shared Directory feature.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Supported
All handsets except DD phones
Devices
Parameter shared_contact_list.url
It configures the access URL of the shared contact file (*.xml) of the phone and registered handsets.
Example:
Description
shared_contact_list.url = http://192.168.10.25/contact.xml
Note: It works only if "static.directory_setting.shared_contact.enable" is set to 1 (Enabled).
Permitted
URL within 511 characters
Values
Default
Blank
Supported
All handsets except DD phones
Devices
Web UI Directory > Dect Directory > Import Contacts > Import to (Shared Directory) > Select .xml file form
134
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg