Pstn Account Configuration - Yealink SIP-T2 Administrator's Manual

Note: It is used in conjunction with the parameter "account.X.reg_failed_retry_max_time" to determine
how long to wait. The algorithm is defined in RFC 5626. We recommend that you set this value to an
integer between 10 to 120 if needed. If the values of this parameter and the parameter "accoun-
t.X.reg_failed_retry_max_time" are set to 0, the interval configured by "account.X.reg_fail_retry_inter-
val" will be used.
Permitted
Integer greater than or equal to 0
Values
Default 0
Parameter account.X.reg_failed_retry_max_time
It configures the maximum time to wait (in seconds) for the phone to retry to re-register after the
account registration fails.
Note: It is used in conjunction with the parameter "account.X.reg_failed_retry_min_time" to determine
Description
how long to wait. The algorithm is defined in RFC 5626. We recommend that you set this value to an
integer between 60 to 1800 if needed. If the values of this parameter and the parameter "accoun-
t.X.reg_failed_retry_min_time" are set to 0, the interval configured by "account.X.reg_fail_retry_inter-
val" will be used.
Permitted
Integer greater than or equal to 0
Values
Default 60
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P) E2/CP920, X=1.
[2]
Y is the server ID. Y=1-2.

PSTN Account Configuration

The following table lists the parameters you can use to register the PSTN account.
Parameter pstn.account.X.enable
Description It enables or disables the PSTN account X.
0-Disabled
Permitted
Values
1-Enabled
Default 1
Supported
CP920
Devices
Web UI Account > Register > Line Active
Phone UI Menu > Settings > Advanced Settings (default password: admin) > Accounts > Active Line
Parameter pstn.account.X.label
Description (Optional.) It configures the label to be displayed on the LCD screen for PSTN account X.
Permitted
String within 99 characters
Values
Default Blank
Supported
CP920
Devices
[1]
[1]
[1]
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
Account Settings
298