Yealink SIP-T2 Administrator's Manual page 529

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Default GroupCommon
Web UI Applications > Broadsoft XSI > Network Directory > Group Common
Parameter bw.xsi.directory.alphabetized_by_lastname.enable
It configures the call ID (first name and last name) display method when the phone receives an incom-
Description
ing call, places an outgoing call or is during an active call.
0-First name Last name
Permitted
Values
1-Last name, First name
Default 0
Supported
All phones except CP920
Devices
Parameter bw.calllog_and_dir
It enables or disables the phone to directly enter the Network Calls screen when pressing the History
soft key on the idle screen.
Description
Note: It works only if "bw.xsi.call_log.enable" is set to 1 (Enabled).
Permitted 0-Disabled, the phone will enter Local Calls screen when pressing the History soft key.
1-Enabled
Values
Default 0
Parameter search_in_dialing.bw_directory.enable
It enables or disables the phone to automatically search entries from the BroadSoft directory, and dis-
Description
play the results on the pre-dialing/dialing screen.
Permitted
0-Disabled
1-Enabled
Values
Default
0
Parameter search_in_dialing.bw_directory.priority
Description It configures the search priority of the BroadSoft directory.
Permitted
Integer greater than or equal to 0
Values
Default 5
Parameter directory_setting.bw_directory.enable
It enables or disables the users to access the BroadSoft directory by pressing the Directory/Dir soft
Description
key.
Permitted
0-Disabled
Values 1-Enabled
Default 0
Parameter directory_setting.bw_directory.priority
Description It configures the display priority of the BroadSoft directory.
Permitted
Integer greater than or equal to 0
Values
Default 6
525
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg