Dnd Feature Configuration; Dnd In Phone Mode Configuration - Yealink SIP-T2 Administrator's Manual

Permitted
0-Disabled
Values 1-Enabled
Default 0

DND Feature Configuration

After you choose a DND mode, you can configure the DND feature for all lines or a specific line. It depends on the
DND mode (except T30P/T30/T19(P) E2/CP920):
Phone (default): DND feature is effective for all lines.
l
Custom: DND feature can be configured for a specific line or multiple lines.
l
Note : DND mode is set by the parameter "features.dnd_mode".
Yealink phones also support DND on code and off code to activate and deactivate server-side DND feature. They
may vary on different servers.
Topics

DND in Phone Mode Configuration

DND in Custom Mode Configuration
DND in Phone Mode Configuration
The following table lists the parameters you can use to configure DND in Phone mode.
Parameter features.dnd.enable
It triggers the DND feature to on or off.
Description
Note: It works only if "features.dnd.allow" is set to 1 (Enabled) and "features.dnd_mode" is set to 0
(Phone) (except T30P/T30/T19(P) E2/CP920 phones).
0-Off
Permitted
Values
1-On, the phone will reject incoming calls on all accounts.
Default 0
Web UI Features > Forward&DND > DND > DND Status
Phone UI Menu > Features > DND > DND Status
Parameter features.dnd.on_code
It configures the DND on code to activate the server-side DND feature. The phone will send the DND
on code to the server when you activate the DND feature on the phone.
Description
Note: It works only if "features.dnd.allow" is set to 1 (Enabled) and "features.dnd_mode" is set to 0
(Phone) (except T30P/T30/T19(P) E2/CP920 phones).
Permitted
String within 32 characters
Values
Default Blank
Web UI Features > Forward&DND > DND > On Code
Phone UI Menu > Features > DND > On Code
Parameter features.dnd.off_code
It configures the DND off code to deactivate the server-side DND feature. The phone will send the
DND off code to the server when you deactivate the DND feature on the phone.
Description
Note: It works only if "features.dnd.allow" is set to 1 (Enabled) and "features.dnd_mode" is set to 0
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Call Features
392