Sealing The Connection Area - Kaco blueplanet 15.0TL3 Manual

7.10

Sealing the connection area

↻ Grid connection is prepared.
1 Lift the housing cover onto the housing and loosely tighten the fastening screws.
2 Secure the housing cover by tightening the 4 screws in a diagonally opposite se-
quence [ T_30/ 10 Nm].
» The device has been mounted and installed.
» Put the device into operation.
KACO blueplanet 15.0TL3 KACO blueplanet 20.0TL3
1
Fig. 33: Closing the housing cover
1 Screw [M6x25]
2 Screw [M6x55]
2
Page 31