Festo MTR Series Operating Instructions Manual page 22

MTR-...
In combinations with a drive shaft vertical to the longitudinal axis of the liner drive:
2. Place the centring disc (B) in the central
recess (A).
3. Mount the connecting elements coupling
hub (E), ring gear (G) and coupling hub
(H), at the same time observing dimen-
sion s.
Rated coupling size
[mm]
30
40
65
4. Screw in the locking screws (F) and (I), but
do not tighten yet.
5. Clean the drive shaft of the axis. The
coupling will only grip without slipping on
a shaft pin which is dry and free of grease.
22
A
B
Fig. 6
Fig. 7
Dimension s [mm]
35
66
90
Fig. 8
Fig. 9
F
E
G
H I
Festo MTR-... 0206a English