Care And Maintenance; Dismantling And Repairs - Festo MTR Series Operating Instructions Manual

MTR-...
7

Care and maintenance

Warning
Deposits can cause an accumulation of heat.
S Clean the motor housing of dust regularly.
In this way you can prevent dust deposits from catching fire.
8

Dismantling and repairs

Please note
Masses which suddenly slide down may cause injury to people in the vicinity of
an MTR-... .
S Make sure that the work load of the driven linear axis is in a safe position.
Mounting position
Horizontal
Vertical
You can now remove the MTR-... from the linear axis.
S
If repairs are required:
Return the motor to Festo.
S
Only repair by Festo will guarantee that all safety standards are observed.
Assemble the MTR-... again as follows:
1. Push the slide or the cantilever of the linear axis into a safe position.
Festo MTR-... 0206a English
Safe position
Centre of stroke
Lower end position
21