Technical Data - Hilti BX 3-ME Original Operating Instructions

3.9 Items supplied
BX 3-ME fastening tool, operating instructions.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com
4

Technical data

4.1 Fastening tool
Weight in accordance with EPTA procedure
01/2003
Nail length (collated nails)
Nail length (single nails)
Nail diameter
Magazine capacity
Compression stroke
Contact pressure
Application temperature (ambient temperature)
Recommended maximum fastening rate
Rated voltage
Frequency
Maximum emitted transmission power
4.2 Battery
Battery operating voltage
Ambient temperature
Storage temperature
4.3 Noise information and vibration values
The sound pressure and vibration values given in these instructions have been measured in accordance
with a standardized test and may be used to compare one power tool with another. They may be used
for a preliminary assessment of exposure. The data given represents the main applications of the power
tool. However, if the power tool is used for different applications, with different accessories or is poorly
maintained, the data may vary. This may significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This may significantly reduce exposure over the total
working period. Set out additional safety measures to protect the operator from the effects of noise and/or
vibration, such as: Maintaining the power tool and accessories, keeping the hands warm, reorganization of
work patterns.
Noise and vibration information (measured in accordance with EN 60745-2­16)
Typical A­rated emission sound pressure level, L
into concrete and steel)
Typical A­rated emission sound pressure level, L
into concrete and steel)
Uncertainty for the specified sound levels, K
Total uniaxial vibration values (in z-direction)
Vibration emission value, a
steel)
Uncertainty, K
22 English
Printed: 19.07.2018 | Doc-Nr: PUB / 5377483 / 000 / 02
WA
(when driving nails
pA
(when driving nails into concrete and
h
B 22/2.6 Li­Ion (02) 3.8 kg
B 22/3.0 Li­Ion (01) 3.9 kg
B 22/5.2 Li-Ion (01) 4.1 kg
14 mm ... 24 mm
30 mm ... 36 mm
3.0 mm
20 nails
12 mm
50 N ... 70 N
−15 ℃ ... 50 ℃
650/h
21.6 V
2,400 MHz ... 2,483.5 MHz
−11.9 dBm
(when driving nails 100 dB
89 dB
3 dB
2.5 m/s²
1.5 m/s²
21.6 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
2184328
*2184328*