Record Node And Sensor Serial Numbers; Cellular Gateway Commissioning - Geokon GeoNet 8900 Series Instruction Manual

3.5.5 RECORD NODE AND SENSOR SERIAL NUMBERS

Record the serial numbers of both the Nodes and of the attached sensors.
For Multi-Channel Nodes, also record the channel to which each sensor has
been connected.
The serial numbers are required when using Agent software and when
commissioning the cellular gateway.

3.6 CELLULAR GATEWAY COMMISSIONING

Commissioning allows the cellular gateway to account for all of the Nodes in the
network. For ease of setup, make sure all Nodes have been added to the
network before commissioning the Supervisor.
Note: The cellular gateway cannot account for Nodes added to the network
after the commissioning process has been completed. Run the commissioning
process again when adding new Nodes.
To commission the Cellular Gateway Supervisor, do the following:
1. Display https://api.geokon.com
FIGURE 20: Accessing the Cloud
2. Click "create user".
Note: To access your data using an API, click
3. Enter your credentials and read/agree to the
FIGURE 21: Create a User
MODEL 8900 SERIES GEONET WIRELESS DATA HOSTING SYSTEM | NETWORK INSTALLATION | 17
in a Web browser.
"use API without
terms of service.
20:
login".
21: