Record Logger And Sensor Serial Numbers; Cellular Gateway Commissioning; Figure 21: Accessing The Cloud; Figure 22: Create A User - Geokon GeoNet 8900 Series Instruction Manual

18 | NETWORK INSTALLATION | GEOKON

3.5.5 RECORD LOGGER AND SENSOR SERIAL NUMBERS

Record the serial numbers of both the loggers and of the attached sensors.
For multiple-channel loggers, also record the channel to which each sensor has
been connected.
The serial numbers are required when using Agent software and when
commissioning the Cellular Gateway.

3.6 CELLULAR GATEWAY COMMISSIONING

Commissioning allows the Cellular Gateway to account for all of the loggers in
the network. For ease of setup, make sure all loggers have been added to the
network before commissioning the gateway.
Note: The Cellular Gateway cannot account for loggers added to the network
after the commissioning process has been completed. Run the commissioning
process again when adding new loggers.
To commission the Cellular Gateway, do the following:
1. Display https://api.geokon.com

FIGURE 21: Accessing the Cloud

2. Click "create user".
Note: To access your data using an API, click
3. Enter your credentials and read/agree to the

FIGURE 22: Create a User

in a Web browser.
"use API without
terms of service.
21:
login".
22: