Single-Channel Loggers; 10-Pin Connector (890X-Xx-01C-10P); Gland Seal (890X-Xx-01C-Cbl); Multiple-Channel Loggers - Geokon GeoNet 8900 Series Instruction Manual

2.3 SINGLE-CHANNEL LOGGERS

A single-channel logger will read one vibrating wire gauge, either via
GEOKON
10-pin cable or via a cable with stripped conductor wires, depending on model.
Though designed to send data wirelessly to a gateway, this model also features
a USB connector, for transferring data using a USB cable to a PC running Agent
software.

2.3.1 10-PIN CONNECTOR (890X-XX-01C-10P)

For use with gauges with 10-pin cable connectors.

2.3.2 GLAND SEAL (890X-XX-01C-CBL)

For use with gauge cables that have stripped conductor wires. The gauge cable
passes through an external cable gland and is wired into the terminal block.
4:
FIGURE 4: 10-Pin Single-Channel Logger (left) and Gland-Seal Single-Channel Logger
(right)

2.4 MULTIPLE-CHANNEL LOGGERS

Multiple-channel loggers will read up to eight vibrating wire gauges,
GEOKON
depending on model, via cables with stripped conductor wires. The cables pass
through external cable glands and are wired into the terminal blocks.
Multiple-channel loggers function in the same manner as other loggers.
Though designed to send data wirelessly to a gateway, these models also
feature a USB connector for transferring data using a USB cable to a PC running
Agent software, just as with single-channel loggers.
MODEL 8900 SERIES GEONET WIRELESS DATA HOSTING SYSTEM | NETWORK COMPONENTS | 5