Alerts And Alarms; Alerts; Alarms - Graco G-Mini 25R800 Instructions Manual

Alerts and Alarms

Alerts and Alarms
The controller monitors and displays two types of
events: Alerts and Alarms.

Alerts

Alerts do not cause the lubrication cycle to stop. These
events are automatically cleared based upon the alert
received.
An amber LED illumi-
nates under ALARM on
the display when an
Alert occurs. See Alert
and Alarm Scenarios on page 27 for a description of
Alerts that could occur.
26

Alarms

Alarms cause the lubrication cycle to stop. Alarms can
trigger immediately or can be the result of an escalated
Alert. Alarms must be cleared immediately.
A red LED illuminates
under ALARM on the
display when an Alarm
occurs. See the Alert
and Alarm Scenarios table on page 27 for a descrip-
tion of Alarms that could occur.
When an Alarm is triggered, any active lubrication cycle
will be terminated. The display begins to count up to
identify how long the Alarm condition has been present.
The counter begins in minutes, then changes to hours,
with a limit of 99 hours.
See ADVANCED PROGRAMMING, page 23 for addi-
tional information about configuring the controller for
Alerts and Alarms.
3A6714C