3. Terminal Setup
To configure the system, connect a serial cable to a COM port on a PC or notebook
computer and to RJ-45 type of console port of the PoE Managed Switch.
PC / Workstation
with
Terminal emulation software
Figure 3-1: PoE Managed Switch Console Connectivity
A terminal program is required to make the software connection to the PoE
Managed Switch.
1. Run terminal program on the OS.
2. When the following screen appears, make sure that the COM port should be
configured as:
z Baud
z Data bits
z Parity
z Stop bits
z Flow control
RS-232 to RJ-45 Cable
Serial Port
: 115200
: 8
: None
: 1
: None
Figure 3-2: COM Port Configuration
PoE Managed Switch
Serial Port
115200,8,n,1
5