Depth Stop Adjustment (Manual) - Landoll 7430 Series Operator's Manual

4-16 DEPTH STOP ADJUSTMENT (MANUAL)

The operating depth of the Vertical Harrow is
controlled by a single-point depth stop. The stop is
located at the center front of the machine.
4-16.1 Adjust the depth stop by turning the
handle in (clockwise) to increase operating
depth (See Figure 4-15). Turn the handle
out (counter-clockwise) to decrease operat-
ing depth. One turn will equal approximately
3/16" adjustment in depth.
4-16.2 The gauge on the side of the depth stop
tube gives a reference for depth setting. The
"A" setting refers to maximum operating
depth.
IMPORTANT
FOR MAXIMUM OPERATING DEPTH, THE LIFT
WHEELS MUST BE IN CONTACT WITH THE
GROUND AND CARRY SOME OF THE MA-
CHINE WEIGHT. RAISING THE LIFT WHEELS
OFF THE GROUND, PERMITS UNCONTROLLED
DEPTH OF EACH FRAME SECTION AND DOES
NOT ALLOW THE LEVELER TO FUNCTION
PROPERLY.
DEPTH STOP TUBE
DEPTH STOP GAUGE
DEPTH STOP
HANDLE
6230depthstopadj
Figure 4-15 Depth Stop Adjustment (Manual)
4-15