Landoll 7430 Series Operator's Manual page 29

3-6 FOLD CYLINDER MOUNT
3-6.1 For 26' models, assemble the fold cylin-
der mount to the middle cross bar of the cen-
ter frame (over the leveler spring assembly)
using 5/8 x 4 x 6-1/2 u-bolts and hex lock
nuts (See Figure 3-6).
3-6.2 For 33' models, assemble two fold cylin-
der mounts to the center frame using 5/8 x
4 x 7-3/4 u-bolts and hex lock nuts. Place
one mount on the middle cross bar over the
leveler spring assembly, and the other mount
over the rear cross bar where the center rear
gangs meet. See Figure 3-6 for proper
placement. Position
mounts so that the hose loops point forward.
both fold cylinder
3-13