Table of Contents
Advertisement
Louver Installation
Installation of the louver AFTER the installation of wall plenum on
elevated floors
From the interior of the utility closet:
1) Tie a rope or tether to the architectural louver and the divider in
the wall plenum to prevent it from falling if dropped.
2) Turn the louver sideways and push the louver out below the
divider in the wall plenum.
3) Pull the louver back against the wall plenum and align the holes.
4) Insert and tighten all eight provided fasteners. When the louver
is secured, remove the safety tether.
16
Advertisement
Table of Contents
