Symmons Allura Trim Series Installation & Operation Instructions

With ta-10 flow control spindle & t-12a cap assembly

Advertisement

Quick Links

Allura Trim Series
Allura Trim Series with TA-10 Flow Control Spindle & T-12A Cap Assembly
Installation & Operation Instructions
Model Numbers
TRIM ONLY
S-4700-TRM
Shower Valve Trim
S-4701-TRM
Shower Trim
S-4702-TRM
Tub/Shower Trim
S-4704-TRM
Tub/Hand Shower Trim
S4708TRM
Shower/Hand Shower Trim
Compliance
ASME A112.18.1/CSA B125.1
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Go to www.symmons.com/register to register your
Symmons product.
Allura
TRIM, TA-10, T-12A
S4700TRMTC
Shower Valve Trim
S4701TRMTC
Shower Trim
S4702TRMTC
Tub/Shower Trim
S4704TRMTC
Tub/Hand Shower Trim
S4708TRMTC
Shower/Hand Shower Trim
T-12A
TA-10
®
S-4700-TRM
S4700TRMTC
S-4704-TRM
S4704TRMTC
S-4701-TRM
S-4702-TRM
S4701TRMTC
S4702TRMTC
S4708TRM
S4708TRMTC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Allura Trim Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Symmons Allura Trim Series

  • Page 1 Allura ® Allura Trim Series Allura Trim Series with TA-10 Flow Control Spindle & T-12A Cap Assembly Installation & Operation Instructions Model Numbers TRIM ONLY TRIM, TA-10, T-12A S-4700-TRM S4700TRMTC Shower Valve Trim Shower Valve Trim S-4701-TRM S4701TRMTC Shower Trim...
  • Page 2 1. Recommended Tools FIGURE 1 Adjustable Wrench Allen Wrench (3mm) Drill Phillips Screwdriver Safety Glasses Thread Seal Tape 2. Dimensions Measurements FIGURE 2 6-3/4", 171 mm 5-1/2", 140 mm Male 1/2" NPT fitting must be recessed 1/4" (6 mm) from finished wall 3-1/2", 89 mm 4-1/8", 105 mm Ref.
  • Page 3 3. Parts Breakdown (Model Numbers Ending in TRMTC) Replacement Parts LIMIT STOP Item Description Part Number SCREW Cap Assy. T-12A Flow Control Spindle TA-10 IMPORTANT: Model numbers ending in TRMTC coordinate with Temptrol pressure balancing valves ordered with Test Cap. The Test Cap is used to allow pressurization of system.
  • Page 4 7. Parts Breakdown Replacement Parts FIGURE 7 Item Description Part Number Showerhead 4-143 Shower Arm 300S Flange Plug Button Screw RTS-026 Star Washer Handle Dome Cover T-19 STANDARD Dial T-131A Screws S4708 SERIES Shower Escutcheon RTS127 Diverter/Volume RTS-004 Control Handle Tub Spout Hand Shower EF-101...
  • Page 5 8. Installation - Shower Valve Trim 1) Place diverter/volume control handle into slot in shower FIGURE 8.1 FIGURE 8.2 escutcheon (FIGURE 8.1). 2) Secure large shower escutcheon to Temptrol pressure balancing valve using mounting screws. Guide handle into control port on valve body (FIGURE 8.2). 3) Snap dial into large shower escutchon (FIGURE 8.3).
  • Page 6 10. Installation - Wall Cradle Assembly 1) Place mounting plate in position. Mark and drill 3/16" FIGURE 10.1 FIGURE 10.2 holes for tile anchors, 5/16" holes for drywall anchors. Install anchors (FIGURE 10.1). Note: For dry wall 1/2" thick or less, insert anchor tool into drywall anchor to secure behind wall prior to installing wall cradle.
  • Page 7 FIGURE 12.1 clockwise to divert to tub spout or other Symmons accessory. Turn diverter control handle counterclockwise to divert to shower or other Symmons accessory. TUB/ACCESSORY SHOWER/ACCESSORY 13. Operation (Volume Control) Turn volume control handle FIGURE 13.1 clockwise to increase volume.
  • Page 8 For more information, go to www.P65Warnings.ca.gov. ■ ■ ■ ■ Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621 ■ ■ ■ ■ Copyright © 2020 Symmons Industries, Inc. symmons.com gethelp@symmons.com ZV-3406 REV 0 030220...

This manual is also suitable for:

Allura ta-10Allura t-12aAllura s-4700-trmAllura s-4701-trmAllura s-4702-trmAllura s-4704-trm ... Show all

Table of Contents