Optical Systems Design OSD2251BP Series Operator's Manual page 39

C P
ONFIGURATION
P
ORT
Indicates port number per row.
P E E
O NABLED
A tick indicates the PoE is enabled for the port.
M P L
ANUAL OWER IMITATION
Allows the user to manually limit power in Watts (W) to each individual port. A tick
indicates that the Manual Power Limitation is enabled.
C V
ONFIGURED ALUE
If the Manual Power Limitation is enabled, the required Configured Value can be entered
in this window. Note: The maximum configured power setting is as follows;
• 60W version: 70W. Entering a higher value produces a maximum of 70W only.
• 90W version: 90W. Entering a higher value produces a maximum of 90W only
• Note: Some PDs require very high inrush current (up to 1.6A). The power output
configuration value must be set to maximum of 56W!
S V
AVED ALUE
If a previously saved Configured Value was entered, the value will be displayed in this
window.
L D
EGACY EVICE
The OSD2251BP provides legacy PoE support. A tick will enable Legacy devices.
H -P E D
I O EVICE
To support Hi-PoE devices "Manual Power Limitation Enabled" and "Hi-PoE Support"
must be enabled and the current (in mA) value in the "Configured Value" must be
specified.
Buttons
: saves the new settings
: resets any changes made
PAGE 39
OSD2251BP OPERATOR MANUAL
OPTICAL SYSTEMS DESIGN
E
O
E
NABLED
DOC ID: 10119301