Problem solving guide
A fault message appears in the display
Problem
Dispenser container
empty
Container 1 empty
Check hot water
intake
Align the machine.
Laundry not properly
spun.
Machine is leaking
1
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor.
52
Possible cause and remedy
One of the detergent containers for external dosing is
empty.
Refill the detergent containers.
External detergent container 1 is almost empty.
The message can refer to containers 1 to 6.
Refill the detergent container.
Reset the container's early-warning counter (see
"Supervisor level - Early-warning counter").
The hot water supply is blocked or restricted.
Check whether the hot water tap is turned on
properly.
Check whether the inlet hose is kinked.
The selected spin speed was not reached during the
final spin due to excessive imbalance.
Check that the washing machine is standing level.
Start the spin cycle again.
The washing machine or the drain valve is leaking.
Turn off the tap.
Call Miele.
1