Machine" Switch-Off Status; Delay Start; Programme Name; Pre-Wash Water - Miele PWM 508 Mop Star 80 Operating And Installation Instructions

Supervisor level

"Machine" switch-off status

The washing machine switches itself
off automatically. It is switched off
after the end of the programme/anti-
crease phase, or after being switched
on if no further selection is made.
Changing this setting leads to increased
energy consumption.
– not switching off
– switching off after 15 minutes
– switching off after 20 minutes
– switching off after 30 minutes (factory
setting)

Delay start

The type of time input for the Delay
start function can be changed or
switched off.
– Off
The Delay start function is not
available for selection.
– End of programme (factory setting)
With the Delay start function, you
specify at what time the wash
programme should finish.
– Start of programme
With the Delay start function, you
specify at what time the wash
programme should start.
– Time until start
With the Delay start function, you
specify after how many hours a
programme should start (up to 96 h).
74

Programme name

When selecting a standard
programme, the name of the selected
programme is shown in the display.
– On (factory setting)
When a programme is selected, the
programme name is displayed for a
few seconds before the display
shows the main menu.
– Off
The main menu is displayed
immediately.

Pre-wash water

You can select the type of water for
the pre-wash.
– Cold
Only cold water is used for the pre-
wash.
– Hot
Hot water is also added for the pre-
wash.
Hot water can only be added if the
wash temperature is above 30°C.