Refitting The Transit Bars; Aligning The Washing Machine - Miele PWM 508 Mop Star 80 Operating And Installation Instructions

 Secure the transit bars to the back of
the washing machine.
Useful tip: Make sure that the holes 
are fitted over the retainers .

Risk of damage from incorrect
transport.
The washing machine may be
damaged if moved without the transit
bars in place.
Keep the transit bars in a safe place.
Fit them again if the machine is to be
transported (e.g. when moving
house).

Refitting the transit bars

Refitting is carried out by reversing the
procedure.

Aligning the washing machine

The washing machine must stand
perfectly level on all four feet to ensure
safe and proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
Screwing out and adjusting the feet
The four adjustable screw feet are used
for levelling the washing machine. All
four feet are screwed in when the
appliance is delivered.
 Using the spanner supplied, turn
counter nut 2 in a clockwise direction.
Then turn counter nut 2 together with
foot 1 to unscrew.
Installation
65