Miele PWM 508 Mop Star 80 Operating And Installation Instructions page 37

Pre-treat mops programmes (ready to use - rtu)
– Mops are washed and pre-treated in one cycle.
– A pre-spin* and a pre-rinse cycle are carried out before the main wash.
– There is no water intake via the fabric softener compartment during the
disinfection process.
Mops +rtu 60°C
Items Cotton, mixed fibre or microfibre mops
Notes Add the pre-treating agent via the fabric softener compartment or
the external dispensing system.
Extras: 2nd Pre-rinse , Microfibre 
0–60 sec
Mops plus + rtu 40°C to 90°C
Items Cotton, mixed fibre or microfibre mops
Notes Add the pre-treating agent via the fabric softener compartment or
the external dispensing system.
Extras: 2nd Pre-rinse , Microfibre 
0–60 sec
 Disinfect mops + rtu 85°C
Items Cotton, mixed fibre or microfibre mops
Notes – Further disinfection methods can be selected.*
– Use powder detergent containing a bleaching agent.
Extras: 2nd Pre-rinse , Microfibre 
0–60 sec
 Disinfect mops + rtu 70°C
Items Cotton, mixed fibre or microfibre mops
Notes – Further disinfection methods can be selected.*
– Use specialist detergents. Observe the country-specific
Extras: 2nd Pre-rinse , Microfibre 
0–60 sec
Mops rtu
Items Cotton, mixed fibre or microfibre mops
Notes – For pre-treating clean mops.
– Add the pre-treating agent via the fabric softener compartment
0–60 sec
* Settings can be altered in the Supervisor level.
guidelines for disinfection.
or the external dispensing system.
Programme chart
Max. load 8.0 kg
Rinse cycles: 2-5*
Max. load 8.0 kg
Rinse cycles: 2-5*
Max. load 8.0 kg
Rinse cycles: 3-6*
Max. load 8.0 kg
Rinse cycles: 3-6*
Max. load 8.0 kg
Rinse cycles: 1
37