Table of Contents
Advertisement
A fault message appears in the display
Problem
Container empty
Hygiene info: run a pro-
gramme of at least 60°C
F - Water intake fault. If re-
start fails, call Service.
Laundry not properly spun
Machine is leaking
Cause and remedy
One of the external detergent containers is empty.
Refill the detergent container.
During the last wash, a wash programme with a temperat-
ure below 60 °C or the Drain/Spin programme was selec-
ted.
Start a programme with a minimum temperature of 60 °C
Clean machine
or the
The hot water supply is blocked or restricted.
Check whether the hot water stopcock has been prop-
erly opened.
Check whether the water inlet hose is kinked.
The selected spin speed was not reached during the final
spin due to excessive imbalance.
Check that the washing machine is level.
Start the spin cycle again.
The washing machine or drain valve is leaking.
Close the stopcock.
Contact the Miele Customer Service Department.
Problem solving guide
programme.
43
Advertisement
Table of Contents
