Changing the programme sequence
Changing a programme
After the start of a programme, it is no
longer possible to select a different
programme.
You will need to cancel the current
programme before you can select a
different one.
If the programme selector is changed,
Programme change not possible
appear in the display. The text
disappears when the programme
selector is set to the original
programme.
Cancelling a programme
You can cancel a programme at any
time after it has started.
Disinfection programmes can only be
cancelled with a PIN code.
Touch the Start/Stop sensor.
Select
Cancel programme
The suds will be pumped away. The
programme is cancelled. The door lock
is released.
Pull open the door.
Remove the laundry.
44
will
.
If you want to select a different
programme:
Close the door.
Select the required programme.
Add detergent to the detergent
dispenser drawer, if necessary.
Touch the Start/Stop sensor.
The new programme will start.
Switching on the washing
machine after an interruption
to the power supply
If the washing machine is switched off
with the button during a wash
programme, the programme will be
interrupted.
Switch it back on with the button.
Note the message in the display.
Touch the Start/Stop sensor.
The programme will also be interrupted
if power is interrupted by a power cut.
When power is restored, confirm the
message in the display with OK.
Touch the Start/Stop sensor.
The programme will continue.