A fault message appears in the display
Problem
Container empty
Container 1 empty
Check hot water in-
let
Align machine. Laun-
dry not properly spun
Machine is leaking
1
The messages will appear at the end of the programme and when the washing
machine is switched on and must be acknowledged with the OK sensor control.
Cause and remedy
One of the external detergent containers is empty.
Refill the detergent container.
External detergent container 1 is almost empty.
The message can refer to containers 1 to 6.
Refill the detergent container.
Reset the container's early-warning counter (see
"Early-warning counter" under "Supervisor level")
The hot water supply is blocked or restricted.
Check whether the hot water stopcock has been
properly opened.
Check whether the inlet hose is kinked.
The selected spin speed was not reached during the
final spin due to excessive imbalance.
Check that the washing machine is level.
Start the spin cycle again.
The washing machine or drain valve is leaking.
Close the stopcock.
Call Miele Service.
Problem solving guide
1)
51