Initial Setup; Download And Install Firmware - RadioLink Turbo PIX User Manual

3. Initial Setup

First, you have to upgrade the firmware you need when you the first time ready to use Turbo Pix.
Radiolink Turbo Pix is default with quadcopter firmware, you have to install the right firmware if you use the
other frame drone.

3.1 Download and Install Firmware

Please connect your Turbo Pix and computer via USB cable. Open the Mission Planner and select the right
COM port drop-down on the upper-right corner of the screen (near the Connect button). Make sure the Baud
rate is 115200 as shown.
Attention:
(1) Do not click CONNECT before you upload the new firmware, please click DISCONNECT if you have
connected successful before. Upload new firmware will be not success if you have connected already.
5
Radiolink Electronic Ltd
www.radiolink.com