Table of Contents
Advertisement
2. Press Mode button twice to into ADVANCE MENU, press Push button into ATTITUDE setting menu,
CH5 is default to the attitude control channel and please choose a 3 Posi-SW and a 2 Posi-SW to control
the attitude.
3．Setup Flight Mode 1 is Stabilize both in Mission Planner and transmitter.
Make sure the -swt- is ON (by press the 3 Posi-SW or 2 Posi-SW to make it ON or OFF) and then you
can setup the PWM data.
Setup the PWM value according to the default numerical interval (change the value by turn the dial, press
the Push button when you choose the right value.
20
Radiolink Electronic Ltd
www.radiolink.com
Advertisement
Table of Contents
