Maintenance And Care; Disposal Information - Flex ADM 60-T Operating Instructions Manual

Have the device adjusted by authorised
technicians only.
The steps required to check the precision are
explained at the end of these instructions
on the illustrated pages.
See from page 208.

Maintenance and care

Observe the following instructions:
– Handle the measuring instrument with care
and protect it from impacts, vibrations and
extreme temperatures.
– Do not touch the receiver lens with your
fingers.
– Clean the lens with a soft, dry cloth only.
– When the measuring instrument is not
in use, keep it in the belt pouch.
– If not used for a prolonged period, take the
batteries out of the measuring instrument.
– Replace used batteries immediately.
– Have the measuring instrument repaired by
qualified technicians and with original spare
parts only. This ensures that the safety
of the measuring instrument is maintained.

Disposal information

EU countries only:
Do not throw electric power tools
into the household waste!
In accordance with the European Directive
2012/19/EC on Waste Electrical and
Electronic Equipment and transposition
into national law used electric power tools
must be collected separately and recycled
in an environmentally friendly manner.
Recycling raw materials instead
of waste disposal.
Device, accessories and packaging should
be recycled in an environmentally friendly
manner. Plastic parts are identified for
recycling according to material type.
WARNING!
Do not throw accumulators/batteries into
the household waste, fire or water.
Do not open disused batteries.
EU countries only:
In accordance with Directive 2006/66/EC
defective or used batteries must be recycled.
FLEX ADM 60–T
17