Identification On The Power Tool - Flex ADM 60-T Operating Instructions Manual

Contents
Identification on the power tool .............. 11
Important safety information ................... 12
Overview ................................................ 13
Control panel .......................................... 14
Technical specifications ......................... 15
Instructions for use ................................. 15
Error message on the display ................ 16
Checking precision ................................. 16
Maintenance and care............................. 17
Disposal information ............................... 17
Exemption from liability .......................... 18
Identification on the device
Laser radiation
Do not stare into beam.
Product of laser class 2
EN 60825-1:2007
Maximum output power ≤ 1 mW
Wave length 635 nm
Laser classification
The device complies with laser class 2, based
on the standard IEC 825-1/EN 60825.
The eye is protected by the lid closure reflex if
somebody accidentally glances into the laser
beam. However, this lid protection reflex may
be impaired by medication, alcohol or drugs.
These devices may be used without further
protective measures if it can be ensured
that no optical instruments reduce the cross-
section of the beam.
Do not aim laser beam at people.
Electromagnetic compatibility
Even though the device satisfies the strict
requirements of the relevant directives,
the possibility cannot be excluded that
the device
- will disrupt other devices (e.g. aircraft navi-
gation systems) or
- will be disrupted by powerful radiation,
possibly resulting in a wrong operation.
In these cases or other uncertaintities, check
measurements should be carried out.
FLEX ADM 60-T
11