Technical Specifications; Instructions For Use - Flex ADM 60-T Operating Instructions Manual

Technical specifications

–
Laser range finder ADM 60–T
Visible laser diode
Laser class
Measurement range *
Precision *
Smallest display size
Power supply
Operating duration
Individual measurements (number) ≤ 5000
Automatic switch-off
– Display illumination
– Laser beam
– Measuring instrument
Temperature range
– for operation
– for storage
Weight (with batteries)
* The measurement range may be less under
unfavourable conditions (bright sunlight,
reflective surfaces). It is recommended
to use a laser target plate (optional).

Instructions for use

– Do not point the laser beam at people
635 nm
2 – Do not look into the laser beam.
– Do not put any optical instruments
0,1–60 m
± 2 mm
This measuring instrument generates laser
1 mm
radiation which may cause blindness.
4 x LR03/AAA
– Do not use the measuring instrument
10 s
– If the device is brought from a very cold
20 s
300 s
0 °C ... 40 °C
– If using adapters and tripods, ensure that
–20 °C ... 70 °C
0,185 kg
The most important operating steps are
explained at the end of these instructions
on the illustrated pages.
See from page 170.
WARNING!
or animals.
in the path of the beam.
CAUTION!
in a damp, dusty or sandy environment.
Device components may be damaged.
to a warmer environment or vice versa,
you should allow the device to acclimatise
before using it.
the device is screwed on tightly.
FLEX ADM 60–T
15