Table of Contents
Advertisement
ADM 70 G / ADM 100 G
Instructions for use
WARNING!
–
Do not point the laser beam at people or animals.
–
Do not look into the laser beam.
–
Do not put any optical instruments in the path of the beam.
This measuring instrument generates laser radiation which
may cause blindness.
CAUTION!
–
Do not use the measuring instrument in a damp, dusty or
sandy environment. Device components may be damaged.
–
If the device is brought from a very cold to a warmer
environment or vice versa, you should allow the device to
acclimatise before using it.
–
If using adapters and tripods, ensure that the device is
screwed on tightly.
The most important operating steps are explained at the end of
these instructions on the illustrated pages.
See from page 125.
Charge battery with USB cable or insert batteries ............. 125
Switching the device on and off ....................................... 128
Setting unit of measurement ............................................ 130
Selecting reference point ................................................. 132
Setting measuring mode .................................................. 135
Linear measurement ....................................................... 138
Area measurement .......................................................... 140
Volume and wall surface measurement ............................. 142
Single Pythagorean ......................................................... 149
Double Pythagorean ........................................................ 152
Continuous measurement / Maximum/minimum
measurement .................................................................. 156
Addition and subtraction .................................................. 158
Checking precision .......................................................... 161
Maintenance and care
Observe the following instructions:
-
Handle the measuring instrument with care and protect it
from impacts, vibrations and extreme temperatures.
-
Do not touch the receiver lens with your fingers.
-
Clean the lens with a soft, dry cloth only.
-
When the measuring instrument is not in use, keep it in the
belt pouch.
-
Have the measuring instrument repaired by qualified
technicians and with original spare parts only.
This ensures that the safety of the measu-ring instrument is
maintained.
13
Advertisement
Table of Contents
