Identification On The Device - Flex ADM 30 Manual

429.279_ADM30.book Seite 10 Freitag, 4. März 2016 8:03 08
FLEX ADM30
Contents
Identification on the device......................... 10
Important safety information....................... 11
Overview..................................................... 12
Technical specifications ............................ 13
Instructions for use .................................... 13
Error message on the display ................... 14
Checking precision .................................... 15
Maintenance and care ............................... 15
Disposal instructions .................................. 15
Exemption from liability ............................. 16

Identification on the device

Laser radiation
Do not stare into beam.
Laser class 2 product
Maximum output power ≤ 1 mW
Wavelength λ=635 nm
EN 60825-1:2007
10
Laser classification
The device complies with laser class 2, based
on the standard IEC 825-1/EN 60825. The eyes
are protected by the lid closure reflex if
somebody accidentally and briefly glances into
the laser beam. However, this lid protection
reflex may be impaired by medication, alcohol or
drugs. These devices may be used without
further protective measures if it can be ensured
that no optical instruments reduce the cross-
section of the beam.
Do not aim the laser beam at people.
Electromagnetic compatibility
Although the device complies with the strict
requirements of the relevant directives/
guidelines, no guarantee can be given that the
device will not
- interfere with other equipment (e.g. aircraft
navigation equipment) or
- be affected by strong radiation, resulting in a
malfunction.
In cases such as these or in the event of doubt,
control measurements should be carried out.