VIPA TP 606C CAN Manual page 45

Manual VIPA HMI
Automatically
connect to WLAN
HB160E - TP - RE_606-1BC40 - Rev. 08/13
If the Touch Panel should connect automatically to your WLAN network
after startup, so the automatically connection is to be activated.
For this open the register "Wireless Information" in the dialog window and
click to the [Advanced...] button.
The following window is shown:
By activating of "Automatically connect to non-preferred networks" an
automatically connection to the chosen network is established as soon as
the network is available.
Please do not forget to store the settings with the KuK Tools as shown
above.
Chapter 2 Deployment Touch Panel
2-25