Integrated Server - VIPA TP 606C CAN Manual

Manual VIPA HMI

Integrated Server

Login data
Change password
Overview
Phrases
Client
Server
Host
Download
Upload
HB160E - TP - RE_606-1BC40 - Rev. 08/13
The Touch Panel has several integrated server that enable a remote
maintenance within a network. Some servers only allow access by means
of entering User name and Password. Per default the following login data
are used:
User name: wince
Password: vipatp
You must not change the user name. But you may change the password
via the registry.
For this, start the editor via START > Programs > Registry Editor. The
entry for the password is to be found at:
HKEY_LOCAL_MACHINE/KUKINIT/DefaultPasswd
Please remember to store the changes to the registry via START >
Programs > KuK Tools before switching off.
Per default the following server are integrated:
• ftp server (activated)
• http server (activated)
• Telnet (activated)
• VNC (not activated)
Phrases that are used in the description of the server:
A client is an application that uses the service of a server within a network.
For example, a web browser is a client because at every call of a website it
sends a request to a web server and receives an answer.
A server is an application that waits for the contact request of a client
application and exchanges messages with it after contact start. This
communication type is called Client-Server communication.
Computer within a network where at least one server is running.
Data transfer Server → Client
Data transfer Client → Server
Chapter 2 Deployment Touch Panel
2-15