Connection To A Plc System - VIPA TP 606C CAN Manual

Chapter 2 Deployment Touch Panel

Connection to a PLC system

Touch Panel
HMI/SCADA
Runtime
- ftp-Server
- http-Server
- Telnet
- VNC
Fieldbus,
Ethernet
SPS
CPU
.
.
SPS
.
CPU
2-6
For the inclusion into your PLC system several HMI/SCADA project-
engineering platforms are at your disposal that has to be installed at an
external PC. Here you may create your project, where appropriate simulate
it and transfer it to the Touch Panel via a connection that you've entered
before. Via the at the Touch Panel pre-installed runtime version of the
HMI/SCADA project engineering platforms your project is run able.
By using the according communication driver, the Touch Panel supports
connecting options to the PLC via field bus and Ethernet.
During the operation your operating device communicates with the
according PLC and reacts to the application courses in the PLC according
to the configured processes. Via dialogs configured before, process values
may be monitored graphically, altered and evaluated.
MMC/SD/CF
MS ActiveSync, ftp, http, Telnet, VNC
.
.
.
HB160E - TP - RE_606-1BC40 - Rev. 08/13
Manual VIPA HMI
PC
HMI/
SCADA