Manual VIPA HMI
Establishing a
ftp connection
HB160E - TP - RE_606-1BC40 - Rev. 08/13
In the following the establishing of an ftp connection between a Windows
based PC (here Windows
your Touch Panel is shown.
• Connect your Touch Panel with the network where your PC is a member
via an Ethernet cable.
• Switch on your Touch Panel.
As soon as your Touch Panel is connected via Ethernet, you may monitor
the IP address data via
• After you've confirmed the pre-settings, start your ftp client and enter the
following text into the "address bar":
• ftp://wince:vipatp@IP-Adresse
The following window appears:
Here you may execute the wanted file operations.
Chapter 2 Deployment Touch Panel
®
2000) with Internet Explorer as ftp client and
.
®
2-17