Table of Contents
Advertisement
Manual VIPA HMI
Configure network
printer
Test print
List network
connections
Terminate network
connections
HB160E - TP - RE_606-1BC40 - Rev. 08/13
The configuration of a network printer happens with the following approach:
• Enter the following into the command prompt:
\> net use printer name network printer
Example:
Printer name: Printer, network printer: \\testserver\printer
Entry: \> net use printer \\testserver\printer
• Enter user name, password and where app. user group.
After the successful login the following message appears
Successfully mapped to network printer
The printer may now be accessed as "network\printer".
For example you may print the content of the current directory with \> dir
> network\printer.
The listing of all network connections of your Touch Panel happens via
\> net use
\> net use
Connected resources:
Status
Local Name
----------------------------------------------------------------
Connected
data
Connected
printer
Command completed successfully
\> █
You may terminate already assigned network resources via
\> net use local_name /d
Example: \> net use data /d deletes the network connection to the
drive "archive" of "test server".
Note!
To keep the settings also after power on, you have to store them to the
registry with START > Programs > KuK Tools > Save Registry.
Chapter 2 Deployment Touch Panel
Remote Name
\\testserver\archiv
\\testserver\printer
2-23
Advertisement
Table of Contents
